BluePrint Engines 376CI Crate Engine

GM COMPATIBLE COMPLETE LS ENGINES 376 CUBIC INCH
BluePrint Engines 376CI Crate Engine
- GM LS3 Style
- Aluminum Heads
- Roller Cam
- 6.2L
- Longblock

This engine will be dyno tested before it ships to you at no additional charge.


HP & Torque: 530 HP / 495 FT LBS
Compression Ratio: 10.7:1
Aluminum Heads
Hydraulic Roller Cam
Nodular Iron Crankshaft
Hypereutectic Pistons

BLOCK:
New GM Aluminum 6.2L block
OEM Block Machined in the USA!
6-Bolt Main
1-Piece Rear Main Seal

ROTATING ASSEMBLY:
Nodular Iron crankshaft
3.622in. Stroke
6.098in. connecting rods w/ 150,000 psi bolts
Hypereutectic Pistons
Internally Balanced

CYLINDER HEADS:
BluePrint Aluminum Cylinder Heads -PS8015
72cc chamber
2.165in. intake/1.600in. exhaust valves
259cc intake/102cc exhaust runners

CAM SPECS:
Cam Type: Roller Cam
.612 Intake .585 Exhaust
225 Intake / 238 Exhaust duration
@ .050 - 113 degree lobe separation, 110 ICL

ALSO INCLUDES:
GM Musclecar Swap Oil Pan
90mm DBW Throttle Body
Loaded Intake Manifold
Fuel Injectors and Rail
Coil Packs
Spark Plugs and Wires
Waterpump
Harmonic Balancer

NOTES:
Engine is not shipped with Engine controller kit. Must purchase separately for your application. Controller kit can be found by part number BPPLS530

BluePrint Engines Recommends Air Intake Kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning.