BluePrint Engines Builder Series 383CI Stroker Crate Engine and TKX Manual Trans Package

SBC Compatible 383 cubic inch
BluePrint Engines Builder Series 383CI Stroker Crate Engine and TKX Manual Trans Package
- Small Block GM Style
- Dressed Longblock with Fuel Injection
- Aluminum Heads
- Roller Cam

This engine will be dyno tested before it ships to you at no additional charge.


HP & Torque: 436 HP / 443 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crank
Hypereutectic Pistons

BLOCK:
NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000in. Bore
1-Piece Rear Main Seal
Mech fuel pump provision: No
Passenger Side Dipstick
Drilled and tapped for clutch linkage

ROTATING ASSEMBLY:
New BluePrint Cast steel crankshaft
3.750in. Stroke
OEM type 5.700in. connecting rods w/ 150,000 psi bolts
Hypereutectic pistons
External Front/ External Rear

CYLINDER HEADS:
BluePrint Aluminum Cylinder Heads - H8002K
64cc chamber
2.02in. intake/1.60in. exhaust valves
195cc intake/75cc exhaust runners

CAM SPECS:
Cam Type: Roller
.544 Intake .555 Exhaust
230 Intake / 236 Exhaust duration
@ .050, 110 ° lobe separation angle

ALSO INCLUDES:
Intake Manifold dual plane, satin aluminum
Complete EFI system
Valve covers, oil pan and timing cover
Brass freeze plugs

Dyno test results shipped with engine
EFI Fuel Pump kit
Spark plugs & wires
180 degree Thermostat & housing
Oil filter
Plug wire seperators
complete front accessory drive with A/C and P/S
ASSEMBLED W/ COMPLETE TKX TRANS PACKAGE:
Mcleod Super Street Pro single disk clutch
Hydraulic throw out bearing
Bell housing
Billet flywheel
Starter

First Gear Ratio: 2.87:1
Second Gear Ratio: 1.89:1
Third Gear Ratio: 1.28:1
Fourth Gear Ratio: 1.00:1
Fifth Gear Ratio: 0.82:1