• Out-of-Stock

CS10 - 20 x 11 in. - 5 x 114.3 - 50mm Offset - Gloss Black Machined

Manufacturer: Carroll Shelby Wheels
Part number: CS10211555BM
MPN: CS10-211555-BM
Availability: Out-of-Stock
£470.95
Tax included

Description

CS10 - 20 x 11 in. - 5 x 114.3 - 50mm Offset - Gloss Black Machined

Fits 2005 & Up Ford Mustang - Rear

Add a dramatic finishing touch to your ride with the CS10 from Carroll Shelby Wheel Company. The CS10, an updated take on the now-discontinued CS2, offers improved brake clearance, increased durability, and reduced weight. The CS10 comes in 20×9.5 and 20×11 sizes and in four distinct finishes: Gloss Black, Gunmetal, Chrome Powder, and Matte Black w/Machined Face. Independently tested in the U.S.A. to SAE J2530 safety and durability standards, these wheels are built just as strong as the statement they'll make.

Actual wheel may vary slightly.These will NOT Fit GT350/500 Mustangs.When fitting a wheel that is wider than 10.5 in. on the rear of the S197 (2005-14 Mustang), you will need to install an adjustable panhard bar in order to center your rear end. When using wider tires on the back of an S197 Mustang (particularly when the vehicle is lowered) you will notice that the rear end may shift to one side resulting in a lopsided appearance. The adjustable panhard bar will allow you to correct this issue.The vehicle application data for this wheel is a general guideline only. Check bolt pattern, width, back-space (or offset), center bore, and brake caliper clearance to confirm that the desired wheel will fit your vehicle. Many vehicles have been modified & these changes may cause wheel fitment issues (i.e. axle swaps, disc brake / big brake conversions, suspension changes, and other modifications). ALWAYS verify the wheel actually fits on your vehicle BEFORE mounting tires. Wheels are non-returnable after tires have been mounted.

FEATURES:
-Flow-Formed Construction - Stronger & Lighter than Traditional Cast Wheels
-Fits 2005 & Up Mustang - Rear
-Choose from 4 Finishes & 2 Sizes
-Center Cap Included
-Use with 9.5 in. Wide Front Wheels for Aggressive Staggered Setup

CS10 - 20 x 11 in. - 5 x 114.3 - 50mm Offset - Gloss Black Machined - Part number: CSW-CS10211555BM - for American Cars - delivery to the UK and the EU

Manufacturer part number: CS10-211555-BM - CS10 - 20 x 11 in. - 5 x 114.3 - 50mm Offset - Gloss Black Machined wheel

Data sheet

Finish
Black and Machined
Material
Flow Formed Aluminum
Construction
Flow Formed
Width (in)
11
Diameter (in)
20
Product Type
Flow Formed Wheel
Quantity
1
Diameter
20
Wheel Construction
Flow Formed
Center Bore Diameter (mm)
73
Center Cap Included
Yes
Backspacing (in)
7.97
Brand
Carroll Shelby Wheels
Offset (mm)
50
Wheel Bolt Pattern (in)
5x4.5
Wheel Bolt Pattern (mm)
5x114.3
Wheel Series
CS10
Center Bore Diameter (in)
2.874
Clear Coat Finish
Yes
Weight (LBS)
34

Package dimensions

Width: 22.50 inch
Height: 22.50 inch
Depth: 13.50 inch
Weight: 34.00 lb