Black Super Weatherstrip Adhesive

Permatex Black Super Weatherstrip Adhesive is a black viscous liquid contact type cement for all types of weatherstripping. Black Super Weatherstrip Adhesive is an air-drying contact cement that allows quick bonding yet maintains enough versatility in tack to allow large areas to be spread and bonded at one time. The drying characteristics allow for repositioning parts after contact is made. The maximum strength of Black Super Weatherstrip Adhesive is
attained after all the solvent has been released. Non-porous surfaces, if assembled while the adhesive is wet, will prevent the release of solvent, consequently, the adhesive will take longer to dry and develop maximum strength.

PRODUCT BENEFITS
- Water resistant
- Excellent chemical resistance
- Fast drying
- Withstands temperature extremes

TYPICAL APPLICATIONS
- Door and trunk moldings
- All types of automotive weatherstripping
- Body side moldings
- Decorative trim

DIRECTIONS FOR USE
For assembly as form-in-place gasket
1. Clean surfaces thoroughly. Use abrasives to remove any powdery mold release from the new weatherstripping.
2. Apply a thin, even film to both surfaces.
3. Allow to dry until the surfaces are tacky (about 3-4 minutes).
4. Bond the two surfaces together, and apply enough pressure to produce uniform contact

FEATURES
- For automotive rubber and metal bonding
- Withstands extreme temperatures
- Allows for repositioning parts after contact is made
- Water resistant

SUGGESTED APPLICATIONS
Cut gaskets, door and trunk moldings.