- Out-of-Stock
S/C 2010 CAMARO M TRANS NO TUNER
Availability:
Out-of-Stock
Description
The Edelbrock supercharger Stage 1 Street system part PN: 15980 for 2010-2013, Manual Trans, LS3 Camaro SS increases the performance of your LS3 engine to 599 horsepower and 547 ft-lbs of torque at the crank when used with the Edelbrock Tune (not supplied in this kit). The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. , HANDHELD PROGRAMMER NOT INCLUDED. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program. 2010-15 convertible installations will require the use of Edelbrock Convertible Brace PN: 15956 (sold separately).
Chevrolet:Small-Block Gen IV LS3:376 (6.2L)
Chevrolet:Small-Block Gen IV LS3:376 (6.2L)
S/C 2010 CAMARO M TRANS NO TUNER - Part number: EDL-15980 - for American Cars - delivery to the UK and the EU
Manufacturer part number: 15980 - S/C 2010 CAMARO M TRANS NO TUNER supercharger-kit
Data sheet
- Finish
- Black Powder Coated
- Mounting Hardware Included
- Yes
- Gasket Or Seal Included
- Yes
- Fuel Injector Type
- 52 4U
- System Type
- Stage 1 - Street System
- Transmission Type
- Manual
- Mounting Bracket Included
- Yes
- Universal Or Specific Fit
- Specific
- Housing Material
- Cast Aluminum
- Quantity
- Kit
- Vehicle Model
- Camaro
- CARB Executive Order Number
- D-215-89
- Air Filter Included
- Yes
- Calibration
- No
- Center Housing Cooling Type
- Intercooler
- Hose Included
- Yes
- Internal Step Up
- Yes
- Oil Capacity
- 150 ML
- Outside Pulley Diameter
- 3.5 IN
- Pulley Belt Width
- 6-Rib
- Rotor Type
- Eaton TVS 2300
- Tensioner Included
- Yes
- Harmonic Balancer Diameter
- 7.5 IN
Package dimensions
Width: 33.25 inch
Height: 25.75 inch
Depth: 41.75 inch
Weight: 176.00 lb