• Out-of-Stock

TRANS GUIDE DOWELS M10X1.5 PR

Manufacturer: Summit Racing
Part number: 917053
MPN: 917053
UPC: 190861230699
Availability: Out-of-Stock
£37.95
Tax included

Description

Bellhousing Install, Alignment tool/ Dowel Pin, 3 in. Length, 0.375 in. Diameter, M10 x 1.50 in., Pair

When mating a transmission to an engine proper alignment is difficult and it's also critical to make sure the bellhousing bolts and block dowels index correctly. Summit Racing transmission guide dowels assist with alignment by threading into the engine block to help guide the two together. The pins are tapered and the heads are slotted so after you get a couple of bellhousing bolts in you can take a small screwdriver and remove them and replace them with the proper bolts. Make your next transmission install a breeze and align your transmission/bellhousing with our dowel pins as guides.

TRANS GUIDE DOWELS M10X1.5 PR - Part number: SUM-917053 - for American Cars - delivery to the UK and the EU

Manufacturer part number: 917053 - TRANS GUIDE DOWELS M10X1.5 PR manual-transmission-bellhousing-bolt

Data sheet

Notes
Fits most engine blocks with M10 x1.50 in. tapped holes in bellhousing.
Quantity
Sold as a pair.
Dowel Pin Offset (in)
None
Dowel Pin Length (in)
3.000 in.
Dowel Pin Diameter (in)
0.375 in.

Package dimensions

Width: 10.00 inch
Height: 10.00 inch
Depth: 10.00 inch
Weight: 10.00 lb