- Out-of-Stock
Pro-Flo 4 EFI Kit Chevrolet LS7 Gen IV
Availability:
Out-of-Stock
Description
The Edelbrock Pro-Flo 4 EFI Kit PN: 36170 for the Chevy Gen IV LS7 engine is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance'super Victor single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors are included along with wire harnesses, ECU and Android-based tablet with E-Tuner Calibration app pre-installed. The Super Victor LS7 manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications. The manifold is also 0.75 inch taller than the standard LS3 version to promote smoother airflow into the rectangular-port heads. This kit uses 42 Lb/Hr injectors and is rated for 675 horsepower at 58 PSI of fuel pressure. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner's initial programming. Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner then selects the most appropriate base calibration. Once the base calibration is set, the self-learning E-Tuner takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather. The E-Tuner provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for. No laptop tuning is required.
Chevrolet:Small-Block Gen IV LS:376 (6.2L)
Chevrolet:Small-Block Gen IV LS:376 (6.2L)
Pro-Flo 4 EFI Kit Chevrolet LS7 Gen IV - Part number: EDL-36170 - for American Cars - delivery to the UK and the EU
Manufacturer part number: 36170 - Pro-Flo 4 EFI Kit Chevrolet LS7 Gen IV fuel-injection-system
Data sheet
- Finish
- Satin
- Flange Type
- 4150
- Maximum Horsepower
- 675
- Gasket Or Seal Included
- Yes
- Wiring Harness Included
- Yes
- Fuel Injector Type
- 42 lb/hr
- System Type
- Traditional 4150-Style Kit
- Bore Diameter
- 1.75 in
- Quantity
- Kit
- Distributor Cap Included
- Yes
- Fuel Pressure Port
- 1/8-27 NPT
- Wire Harness Included
- Yes
Package dimensions
Width: 25.00 inch
Height: 11.00 inch
Depth: 30.00 inch
Weight: 36.60 lb