PRO FLO 4 FUEL INJECTION KIT SEQUENTIAL PORT SBC VORTEC/E-TEC 550 MAX HP 29 LbHr

Manufacturer: EDELBROCK
Part number: 35780
MPN: 35780
UPC: 085347357802
Availability:
£3,517.55
Tax included

Qty: 4, Delivery time: 8 working days

Description

The Edelbrock Pro-Flo 4 EFI Kit PN: 35780 for the Small-Block Chevy engine with Vortec/E-Tec cylinder heads is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Victor-style single-plane intake manifold that comes preassembled with high-flow 29 lb/hr injectors, fuel rails and 4150-flange throttle body. The Pro-Flo 4 EFI PN: 35780 is compatible with factory-style cylinder heads or Edelbrock Performer and Performer RPM Cylinder heads. Also included is a distributor designed to work specifically with Pro-Flo 4 providing fully sequential port injection and infinite control over ignition and fuel events. This system is rated for 450 horsepower at 58 PSI with all supporting sensors, ECU, wire harnesses and 7-inch Android tablet for a streamlined installation. Key Pro-Flo 4 features are Self-Learning Fuel Map Technology, Wide-Band O2 Closed Loop Mixture Control and an ECU with advanced processor technology and Bluetooth connectivity. E-Tuner Android Software includes a Setup Wizard to simplify installation and provides fuel and spark adjustability for complete control over the system. Pro-Flo 4 EFI requires no laptop tuning. Minimal setup and tuning adjustments are required with base calibrations provided in the software. The ECU is self-learning and will continually adjust the fuel injection calibration for maximum performance by maintaining a specified target air-fuel ratio as you drive. The E-Tuner Software provides the ability to fine-tune air-fuel ratios, ignition curve, idle speed, acceleration fuel, fans, rev-limiter and more. Multiple displays let you monitor engine performance in real-time from inside or outside of the vehicle while retaining the simplicity that Pro-Flo 4 systems are known for.

Chevrolet:Small-Block Gen I Vortec:283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

PRO FLO 4 FUEL INJECTION KIT SEQUENTIAL PORT SBC VORTEC/E-TEC 550 MAX HP 29 LbHr - Part number: EDL-35780 - for American Cars - delivery to the UK and the EU

Manufacturer part number: 35780 - PRO FLO 4 FUEL INJECTION KIT SEQUENTIAL PORT SBC VORTEC/E-TEC 550 MAX HP 29 LbHr fuel-injection-system

Data sheet

Engine Make/Size
Chevy Small Block (262-400)
Finish
Satin
Flange Type
4150
Cylinder Head Type
GM Vortec/Edelbrock E-TEC
Fuel Rate
29 lbs./hr
Maximum Horsepower
450
Gasket Or Seal Included
Yes
Wiring Harness Included
Yes
Fuel Injector Type
29 lb/hr
System Type
Traditional 4150-Style Kit
Bore Diameter
1.75 in
Quantity
Kit
Distributor Cap Included
Yes
Idle Air Control Motor Included
Yes
Throttle Body Type
4 Barrel
Fuel Pressure Port
1/8-27 NPT
Manifold Height
4.58 in
Wire Harness Included
Yes

Package dimensions

Width: 25.12 inch
Height: 10.50 inch
Depth: 30.12 inch
Weight: 40.00 lb