OIL PUMP,SBC BILLET

Racing Oil Pump; May Req. Mod For Larger Strokes; Use Stock Mounting Stud And Oil Pump Shaft; 8.25 in. Deep Oil Pans; Integral Bottom Feed Design; Billet Alum.

- 6061-T6 billet housing with 3 times larger mounting boss area to prevent breaking
- Weight 1 lb. less than stock oil pump with pickup
-Inlet area is increased to prevent cavitation
- Thrust bearing assembly increases housing and gear life due to drive shaft axial forces on the drive gear
- Pump will clear 4-1/4in stroke with most steel rods
- Made to work with 8-1/4in deep oil pans