Description
Edelbrock part PN: 7162 Performer RPM Camshaft is designed for big-block Chevy 396-427-454 V-8 applications. This Edelbrock cam kit produced 540 HP & 530 ft-lbs. of torque when used with PN: 7163 intake and PN: 60559 cylinder heads on a 454 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft., Camshaft Specifications:,Duration @ .050 Intake: 240 degrees ,Duration @ .050 Exhaust: 246 degrees,Lift @ Valve Intake: .560in.,Lift @ Valve Exhaust: .573in.,Lobe Separation: 112 Degrees,Intake Centerline: 110 Degrees,Idle Vacuum @ 1000 RPM's: 10in.
Chevrolet:Big-Block Mark IV:396 (6.6L)/402 (6.6L)/427 (7.0L)/454 (7.4L)/502 (8.2L)
CAM 7161/7163 - Part number: EDL-7162 - for American Cars - delivery to the UK and the EU
Manufacturer part number: 7162 - CAM 7161/7163 engine-camshaft-and-lifter-kit
Data sheet
- Engine Make/Size
- Chevy Big Block (396-502)
- Usage
- Street/Performance
- RPM Range
- 1000-7000
- Grade Type
- Performance
- Lifter Type
- Hydraulic
- Exh. Duration @ .050 in. (Deg)
- 246
- Exh. Duration Advertised (Deg)
- 306
- Exhaust Valve Lift
- 0.573 IN
- Intake Duration @ 0.050 in.
- 240 Degree
- Intake Duration Advertised
- 300
- Intake Valve Lift
- 0.560 IN
- Cam Type
- Cast
- Advertised Exhaust Duration
- 306 DD
- Advertised Intake Duration
- 300 DD
- Computer Controlled Compatible
- No
- Exhaust Duration at .050 inch Lift
- 246 DD
- Intake Duration .050 Inch Lift
- 240 DD
- Lifter Materials
- Hardened Steel
- Lobe Separation
- 112 DD
Package dimensions
Width: 8.00 inch
Height: 3.60 inch
Depth: 27.00 inch
Weight: 15.05 lb