CARB & CHOKE CLEANER 16.25OZ (460G)

Prime Guard Carburetor and Choke Cleaner
Oxygen Sensor Safe

DIRECTIONS: Read entire label before use. Use only in well-ventilated are. Protect rubber, plastic parts and painted surfaces from liquid stream and overspray. Use extension tube to pinpoint direction of spray.

CARBURETOR AND LINKAGE: With engine cold and off, remove air filter. Spray Prime Guard Carburetor Cleaner on exterior surface of carburetor and linkage.

PCV VALVES: With the engine cold, disconnect hose from valve. Insert extension tube into valve opening and spray while working valve back and forth. Start engine and spray three or four short bursts.

AUTOMATIC CHOKE: With engine cold, spray ends of choke valve while opening and closing manually.

AIR INTAKE CLEANER: With engine cold and off, disconnect air intake boot on side of engine. Use cloth to absorb product that will drain during use. Spray entire can into throat while moving butterfly valve open and closed. Replace air intake hose assembly and immediately drive vehicle. For best results, use every 3 months or 3,000 miles.

No Global Shipping Programme (nonGSP)